Langsung ke konten utama

Wood Briquette Left Behind 25 Years of Wood Pellet

Common areas with wood burning application it will be appropriate to use wood briquette and less suitable when using wood pellets. Various areas in various parts of the world use wood for heating (wood burning stove or boiler) or for cooking. If the ratio of wood as fuel is much so the business of  wood briquette production will be more attractive than wood pellets. Globally wood briquette are less popular than wood pellets, so the wood briquette production is also far below the wood pellets. Wood briquette also has its own characteristics compared to wood pellets.




In general, wood briquette production is also much easier than wood pellets. The particle size, raw materials, moisture content and operations slightly more stringent than the requirements for the production of wood pellets. All wood pellets have a cylindrical shape which is only distinguished diameter of the cylinder, and a commonly used the diameter of 6 mm and 8 mm, while the wood briquette in addition to its shape can vary in terms of size also vary, for example, of the diameter of 50 mm (5 cm) to 90 mm (9 cm). Wood pellets almost all using mechanical compression on the wood briquette production while there is some compression options, namely mechanical, hydraulic and extrusion (screw). The different compression technology will also produce different product characteristics, such as differences in mechanical compresssion (ram / piston briquette) and by extrusion (screw briquette). Raw materials that can be made pellets almost certainly be made briquette, but all the raw materials that could be made briquette may not be successful to make pellets. Wood briquette density is also higher than wood pellets, which ranges from 1000-1400 kg/m3 (62.4 to 87.4 pounds/ft3) while on wood pellets range from 700-800 kg/m3 (43.7 to 50 pounds/ft3 ).

Whereas when compared with wood (round wood/log) are usually capable of burning (burning time) about 30 minutes then with a high density on the wood briquette made have burning time of about 6-7 time. Another factor that cause the long burning time is low moisture content than round wood/log.  In many ways wood briquette production process has many similarities with wood pellets or both in the biomass densification technology group. Although both carbon neutral because both biomass fuel, but the process of burning wood briquette produces 60% fewer emissions than using firewood. Then for the cool areas that burn a lot of wood for the fireplace (heating), the wood briquette is the right choice.

Komentar

Postingan populer dari blog ini

Carbon Positive, Carbon Carbon Neutral or Negative?

Greenhouse gases from burning fossilfuels have caused the Earth's temperature to rise. Increasing the temperature of the earth or global warming causing numerous disasters due to climate change in a number of places on earth. When greenhouse gases not controlled then the result of damage to the environment of the earth will be more severe. Therefore, efforts were made to reduce greenhouse gases as the cause of environmental problems. In general, there are four common scenarios to prevent the global warming effect of CO2 in the atmosphere gradually, namely: 1.increasing the efficiency so the fossil fuel consumption decreases, 2.mix of renewable fuels with fossil fuels so that fossil fuel consumption has also decreased, 3.substitution of fossil fuels with renewable fuels 4.and the absorption of CO2 in the atmosphere so that the concentration of greenhouse gases can be reduced. Here are some basic terms related to the above problems. Based on the origin and the effect that CO2 in the atmo…

10 Advantages By Making Energy Plantations for Wood Pellet Production

Assuredness of supply of raw materials is one of the key factors of business success in the wood pellets. There are two ways to obtain raw materials commonly done today: a. Buying from the owner of source of raw materials. b. Producing its own the availability of raw materials. While the 3rd way and there is still few for business owners make wood pellets is by mix way, which is partly provide by their own of raw materials and some rest buy from the other source of raw materials.
While examining at the types of biomass raw materials there are two kinds, namely : a. Woody biomass b. Non-wood biomass such as agricultural wastes (empty fruit bunches of palm oil trees, corn cobs, rice husks and so on). Currently woody biomass remains a priority to be products of wood pellets as a number of advantages over non-wood biomass which is generally an agricultural wastes, are included in the category of biomass pellets or agri-waste pellets. The comparison between wood pellet and biomass pellet …

Wood Pellet, PKS and Biomass Power Plant Market in Japan